More than sensors+aut
Søg
JUMO Måle- og Reguleringsteknik A/S

Fabriksvænget 16
4130 Viby SJ, Danmark

Phone: +45 46 19 46 66
Fax: +45 46 19 43 63
e-mail: info.dk(at)jumo(dot)net

JUMO AQUIS 500 CR Transmitter/Controller for conductivity, TDS, resistivity and temperature (20.2565)

Funktioner

  • Direct changeover to
       - conductivity (µS/cm or mS/cm)
       - resistivity (k x cm or M x cm)
       - TDS measurement (ppm or mg/l)
       - customer-specific table
  • Automatic temperature compensation:
       off (e.g. USP), linear, ASTM, natural water (EN 27888/ISO 7888)
  • Large LC graphics display with background lighting
  • Choice of display: large numbers, bar graph or trend display
  • Calibration options according to measured variable: cell constant and
       temperature coefficient
  • Calibration logbook
  • Two-electrode cells (as standard) or four-electrode cells can be connected
  • Pollution detection can be activated
  • Auto-range operation
  • IP67 enclosure protection (in wall-mounting housing)
       IP65 enclosure protection (for panel mounting)
  • Language changeover:
      German, English, French; further languages can be loaded through the
      setup program 
  • Using the setup program: user-friendly programming, plant documentation,
      additional languages can be loaded

    • Beskrivelse

    The instrument is used for the conductive measurement/control of electrolytic conductivity, resistivity or the TDS value. In addition, the JUMO AQUIS 500 CR also offers the possibility of showing the measured conductivity according to a customer-specific table.
    Conductive two-electrode cells as well as four-electrode cells can be connected to the instrument.
    Temperature serves as the second input variable, measured by a Pt100/1000 probe. Depending on the measured variable, it is therefore possible to implement specific, automatic temperature compensation.
    The instrument is operated using keys and a large LC graphics display on which the measurements are clearly legible. The plain-text presentation of the parameters makes it easier for the user to configure the instrument, and also helps in programming it correctly.
    Thanks to its modular design, the instrument can be perfectly matched to the particular application requirement. Up to four outputs are available (see the block diagram for the functions).
    Typical areas of application
    Universally applicable in water and wastewater engineering, service/process water and wastewater, drinking water and well/surface water, pure and high-purity water as well as for pharmaceutical water (e.g. as per USP, Ph.Eur., WFI), water quality measurements, TDS measurements (ppm or mg/l).

    Tilbehør

    Tilbehørsartikler

    Varenummer Produktbeskrivelse Tildeling
    00398161 Wetterschutzdach AQUIS und 202610; (PG202850) Pris på forespørgsel
    00398163 Standsaeule komplett; (PG202850) Pris på forespørgsel
    00453191 Haltebügel für Hängearmatur Durchmesser 40mm; (PG209791) Pris på forespørgsel
    00456352 PC-Interface mit Omsætter USB/TTL Pris på forespørgsel
    00477842 Hutschienenmontage-Set für JUMO Aquis 500; (PG209791) Pris på forespørgsel
    00483664 Rohrmontageset komplett Aquis 500 Pris på forespørgsel
    00506351 Set Gehaeuserueckwand JUMO-AQUIS 202560/65/66/68 Pris på forespørgsel
    Varenummer Produktbeskrivelse Tildeling
    00480054

    Grundtype: CR Påbygningsinstr. IP67 kompl. Regulator

    Udgang 1: Fabriksindstilling

    Udgang 2: ikke belagt

    		Pris på forespørgsel
    00480055

    Grundtype: CR Påbygningsinstr. IP67 kompl. Regulator

    Udgang 1: Fabriksindstilling

    Udgang 2: Fabriksindstilling

    		Pris på forespørgsel
    1. Sitemap